KorpaDIN 0,00
0
Pozovite nas:037 422 328

Lethal devices

Termobaric hand grenade TG-1

Termobaric hand grenade ATG-1

Thermobaric hand grenade TG-1 is intended to defeats enemy troops and equipment located mainly in closed and semi-closed area, trenches, field shelters, buildings and on open area, as well as light armored and unarmored vehicles.

TG-1 grenade has cylinder shape body made of aluminium, filled with thermobaric S-19 type mixture. TG-1 uses standard mechanical fuse for explosive initiation.

Hold the grenade firmly, keeping EOT handle pressed against the hand and pull out safety ring. Throw grenade to the target. After 3-4 seconds delay igniter initiates explosion. Explosion creates high temperature and high-pressure cloud.

Diameter: 60 mm
Height: 163±1 mm
Unit mass: 500±10 g
Ignition method: standard mechanical fuse
Delay time: 3-4 s
Explosive charge: thermobaric mixture
Explosive charge mass: 305±10 g
Shock wave overpressure (1 m) – not less than 1 atm (98,07 kPa)
Shock wave overpressure (5 m) – not less than 0.31 atm (30 kPa)
Cloud diameter: not less than 1.2 m
Explosive cloud temperature: not less than 2200 ºC

Transport packing: waterproof carton box, wooden box
Inner packing: PE bag
Box dimension: 474x288x245 mm
Number of units in the box: 20
Box gross weight: 16 kg

UN 0292
Class:1.1 F

ATG-1 thermobaric hand grenade defeats enemy troops and equipment located mainly in closed and semi-enclosed spaces, trenches, field shelters, buildings and outdoors, as well as light armored and unarmored vehicles

ATG-1 grenade has cylinder shape body made of aluminium, filled with thermobaric S-40 type mixture. ATG-1 uses standard mechanical fuse for explosive initiation.

Hold the grenade firmly keeping EOT handle pressed against the hand and pull out safety ring. Throw grenade to the target. After 3-4 seconds delay igniter initiates explosion. Explosion creates high temperature and high-pressure cloud.

Diameter: 36.7 mm
Height: 127±1 mm
Unit mass: 205 ± 5 g
Ignition method: standard mechanical fuse
Delay time: 3-4 s
Explosive charge: thermobaric mixture
Explosive charge mass: 105 ± 5 g
Explosive cloud temperature: not less than 2200ºC

Transport packing: waterproof carton box, wooden box
Inner packing: PE bag
Box dimension: 474x288x245 mm
Number of units in the box: 36
Box gross weight: 7.4 kg

UN 0292
Class: 1.1 F

Thermobaric mine 120mm TB

Flamable hand thrown grenade BRZ M90

Mine 120mm TB with thermobaric loading and special fuse UT M18 is intended for the destruction of enemy troops and equipment, by dropping from unmanned aircrafts (drones)

It have a strong destructive power as a result of polymerized, insensitive, thermobaric explosive, PBX as per MIl-STD-2105B which, when activated provides strong overpressure and high temperature. The shock wave follows the configuration of the terrain and passes through trenches and field fortifications.

The body of the mine is made of steel, cylindrical shape, filled with a thermobaric explosive. Ignitor is UT M18, with two levels of protection. Instead of classic, metal fin, shell is designed with plastic.

Hold grenade firmly keeping EOT handle pressed against the hand, and pull out safety ring. At this moment, mechanical igniter is released, which, after throwing activate delay igniter. After delay time of 2,5 to 3,5 seconds, body of the grenade starts to burn releasing heat from termite mixture, which can burn 5mm plate.

Weight of the mine: 13100±100g
Hight: 371±1mm
Diameter: 120mm
Weight of PBX explosive loading 2450±50g
VoD of explosive mixture 7671 m/s
Density of explosive mixture 1,65g/cm³
Overpressure at 5m 0,5 bar
Lethal (kill) radius of fragments min.20m

Transport packing: wooden box
Protective inner packing: Cartoon cilinder
Number of mines in transport packing: 2
Mass of transport packing: 34kg
UN 0294
Class 1.2 F

Flamable hand thrown grenade BRZ M90 is designed for a special military and police units applications, in setting fire to technical and military equipment, light bunkers and storage made of wood and earth. Also is applicable in destroying enemy, situated in small and easy flammable bunkers and shelters.

Body of the grenade is cylindrical, made of steel, loaded with flammable, termite mixture.

Hold grenade firmly keeping EOT handle pressed against the hand, and pull out safety ring. At this moment, mechanical igniter is released, which, after throwing activate delay igniter. After delay time of 2,5 to 3,5 seconds, body of the grenade starts to burn releasing heat from termite mixture, which can burn 5mm plate.

Termobaric hand grenade TG-1

Thermobaric hand grenade TG-1 is intended to defeats enemy troops and equipment located mainly in closed and semi-closed area, trenches, field shelters, buildings and on open area, as well as light armored and unarmored vehicles.

TG-1 grenade has cylinder shape body made of aluminium, filled with thermobaric S-19 type mixture. TG-1 uses standard mechanical fuse for explosive initiation.

Hold the grenade firmly, keeping EOT handle pressed against the hand and pull out safety ring. Throw grenade to the target. After 3-4 seconds delay igniter initiates explosion. Explosion creates high temperature and high-pressure cloud.

Diameter: 60 mm
Height: 163±1 mm
Unit mass: 500±10 g
Ignition method: standard mechanical fuse
Delay time: 3-4 s
Explosive charge: thermobaric mixture
Explosive charge mass: 305±10 g
Shock wave overpressure (1 m) – not less than 1 atm (98,07 kPa)
Shock wave overpressure (5 m) – not less than 0.31 atm (30 kPa)
Cloud diameter: not less than 1.2 m
Explosive cloud temperature: not less than 2200 ºC

Transport packing: waterproof carton box, wooden box
Inner packing: PE bag
Box dimension: 474x288x245 mm
Number of units in the box: 20
Box gross weight: 16 kg

UN 0292
Class:1.1 F

Termobaric hand grenade ATG-1

ATG-1 thermobaric hand grenade defeats enemy troops and equipment located mainly in closed and semi-enclosed spaces, trenches, field shelters, buildings and outdoors, as well as light armored and unarmored vehicles

ATG-1 grenade has cylinder shape body made of aluminium, filled with thermobaric S-40 type mixture. ATG-1 uses standard mechanical fuse for explosive initiation.

Hold the grenade firmly keeping EOT handle pressed against the hand and pull out safety ring. Throw grenade to the target. After 3-4 seconds delay igniter initiates explosion. Explosion creates high temperature and high-pressure cloud.

Diameter: 36.7 mm
Height: 127±1 mm
Unit mass: 205 ± 5 g
Ignition method: standard mechanical fuse
Delay time: 3-4 s
Explosive charge: thermobaric mixture
Explosive charge mass: 105 ± 5 g
Explosive cloud temperature: not less than 2200ºC

Transport packing: waterproof carton box, wooden box
Inner packing: PE bag
Box dimension: 474x288x245 mm
Number of units in the box: 36
Box gross weight: 7.4 kg

UN 0292
Class: 1.1 F

Thermobaric mine 120mm TB

Mine 120mm TB with thermobaric loading and special fuse UT M18 is intended for the destruction of enemy troops and equipment, by dropping from unmanned aircrafts (drones)

It have a strong destructive power as a result of polymerized, insensitive, thermobaric explosive, PBX as per MIl-STD-2105B which, when activated provides strong overpressure and high temperature. The shock wave follows the configuration of the terrain and passes through trenches and field fortifications.

The body of the mine is made of steel, cylindrical shape, filled with a thermobaric explosive. Ignitor is UT M18, with two levels of protection. Instead of classic, metal fin, shell is designed with plastic.

Weight of the mine: 13100±100g
Hight: 371±1mm
Diameter: 120mm
Weight of PBX explosive loading 2450±50g
VoD of explosive mixture 7671 m/s
Density of explosive mixture 1,65g/cm³
Overpressure at 5m 0,5 bar
Lethal (kill) radius of fragments min.20m

Transport packing: wooden box
Protective inner packing: Cartoon cilinder
Number of mines in transport packing: 2
Mass of transport packing: 34kg
UN 0294
Class 1.2 F

Flamable hand thrown grenade BRZ M90

Flamable hand thrown grenade BRZ M90 is designed for a special military and police units applications, in setting fire to technical and military equipment, light bunkers and storage made of wood and earth. Also is applicable in destroying enemy, situated in small and easy flammable bunkers and shelters.

Body of the grenade is cylindrical, made of steel, loaded with flammable, termite mixture.

Hold grenade firmly keeping EOT handle pressed against the hand, and pull out safety ring. At this moment, mechanical igniter is released, which, after throwing activate delay igniter. After delay time of 2,5 to 3,5 seconds, body of the grenade starts to burn releasing heat from termite mixture, which can burn 5mm plate.